Mesin jahit mini ini praktis pengunaannya. Anda hanya perlu menekan nekan saja (seperti mengunakan alat stapless kertas). Jahitan anda akan menjadi kuat dan rapi. Praktis untuk menjahit kecil seperti menambal pakaian sobek, menjahit resleting, dll.

Ukuran 11 x 2.5 x 8 cm.

1. holding machine :With the right hand four fingers hold the base of the thumb naturally on the roof top of the fuselage , steady hold of the whole .

2. threading :Will gently pull the line on the spool . Then through lead coils. Cited over the needle thread temporarily placed next to the other will be the needle threader from the front ( to the fuselage junction ) through the machine needle , and then thread into holes in the threading device , pull out the needle threader head line about 2-3 cm pressure line can be pressed board stand .

3. Feeding :Lift the load plate with his right index finger , will be ready to be sewn fabric ( thickness of not more than 1 mm ) placed flat on the platen , the platen pressed gently back into the fabric ;

4. sewing operation :With his left hand holding the fabric , the right thumb and gently press down quickly cover the top pressure in the end , the thumb and then , under pressure, and so forth, feed mechanism automatically be sent to the left seam material . Holding machine gradually shifted to the right hand , left hand gently hold the rhythm cloth is sewn with the sewing object moves to the left until the sewing end ; thread with scissors and gently pull the plate out fabrics are sewn from fabric tails, pull out the last of a thread, so that it wear into the side of a coil taut and tie a knot , pin it firmly up ; sewing end of the way when not in deadlift fabric to pull broken head , to avoid damaging the needle . stitch ;

5. The function of automatic adjustment pin into the fabric and the tension betweenHowever, it is necessary to pay attention to the following points : Pin tight, the pressure adjusting nut slightly counterclockwise ; stitch too loose , the pressure adjusting nut slightly clockwise ; Department of correct stitch tension . For bigger stitch , left Rab can be a little faster. stitch density for some may be left Rab slower ;

6. -for-line group: If you change lines with a large group , you can take pole with spare spool shaft , set into a large ball. Put spare the rod end of the plastic caps on the large fixed line group, and then re- stringing , adjust the line tension after sewing ; using cotton or synthetic line works best.

7. needle exchange: Loosen the screws and remove the needle . Shown fitted with a new needle , pay attention to the flat face of the needle is fixing screws , can not hold against the pocket , manual operation , the sewing machine with automatic feed distribution and regulation of inter- stitch elastic features, to achieve professional results ; product uses exquisite color gift packaging, except as the ideal family household , but also suitable as gifts and conference gifts.

Packing : Cartoon Box